Mira A3 - IT IS FIXABLE - CSRNation2024-03-28T20:11:58Zhttp://csrnation.ning.com/forum/topics/mira-a3-it-is-fixable?commentId=1736041%3AComment%3A1251186&feed=yes&xn_auth=noThanks, Judy. I have three j…tag:csrnation.ning.com,2012-11-30:1736041:Comment:12514072012-11-30T01:47:36.389ZTricia McLaughlinhttp://csrnation.ning.com/profile/Tricia58
<p>Thanks, Judy. I have three jobs on next week, and I plan on fooling with it over the weekend. I'll get the manual out and do what I can. I can't thank you enough for replying back. Fingers crossed that Otec does the job so this tinkering can stop. Most times I do it it makes it worse, but I'm going to really work on it over the weekend. I can't stand the amount of time it's taking me to get tripts out due to it. Nuf is Nuf.</p>
<p></p>
<p>Thanks so, so much, Tricia</p>
<p>Thanks, Judy. I have three jobs on next week, and I plan on fooling with it over the weekend. I'll get the manual out and do what I can. I can't thank you enough for replying back. Fingers crossed that Otec does the job so this tinkering can stop. Most times I do it it makes it worse, but I'm going to really work on it over the weekend. I can't stand the amount of time it's taking me to get tripts out due to it. Nuf is Nuf.</p>
<p></p>
<p>Thanks so, so much, Tricia</p> Somebody correct me if I'm wr…tag:csrnation.ning.com,2012-11-29:1736041:Comment:12512382012-11-29T23:33:20.129ZJudyhttp://csrnation.ning.com/profile/JudyRunes
<p>Somebody correct me if I'm wrong, but isn't the stroke depth the red knob? I'm talking about the white knob at the top left-hand side if you pop the hood. The white one is the keyboard tension. I turned mine all the way to the left (counterclockwise) and then turned it to the right one turn day by day until I started seeing a difference.</p>
<p>You also might want to either turn on/off your SmartStroke function. </p>
<p>Somebody correct me if I'm wrong, but isn't the stroke depth the red knob? I'm talking about the white knob at the top left-hand side if you pop the hood. The white one is the keyboard tension. I turned mine all the way to the left (counterclockwise) and then turned it to the right one turn day by day until I started seeing a difference.</p>
<p>You also might want to either turn on/off your SmartStroke function. </p> You mean the white knob, righ…tag:csrnation.ning.com,2012-11-29:1736041:Comment:12512362012-11-29T23:15:46.677ZTricia McLaughlinhttp://csrnation.ning.com/profile/Tricia58
<p>You mean the white knob, right? The depth of stroke thingie?</p>
<p>You mean the white knob, right? The depth of stroke thingie?</p> Not that much, but it did hel…tag:csrnation.ning.com,2012-11-29:1736041:Comment:12513022012-11-29T22:48:17.631ZJudyhttp://csrnation.ning.com/profile/JudyRunes
<p>Not that much, but it did help some. Although, I will say -- I know, not again! -- adjusting that tension control knob has cleaned it up the best it's ever been, even right after the "fix."</p>
<p>Not that much, but it did help some. Although, I will say -- I know, not again! -- adjusting that tension control knob has cleaned it up the best it's ever been, even right after the "fix."</p> Judy, don't jinx me please. …tag:csrnation.ning.com,2012-11-29:1736041:Comment:12512992012-11-29T20:55:16.105ZTricia McLaughlinhttp://csrnation.ning.com/profile/Tricia58
<p>Judy, don't jinx me please. Did yours decrease after the overhaul? </p>
<p>Judy, don't jinx me please. Did yours decrease after the overhaul? </p> Don't hold your breath. My s…tag:csrnation.ning.com,2012-11-29:1736041:Comment:12511862012-11-29T03:02:37.793ZJudyhttp://csrnation.ning.com/profile/JudyRunes
<p>Don't hold your breath. My shop also claimed they had a "fix" for the stacking. It really didn't help. When I brought it back for its next service I told them it was still stacking, and they said to play around with that dial I mentioned in the other post. That dial really does affect things. You just have to figure out where the dial and your depth stroke combined with your writing stroke makes a perfect fit for you.</p>
<p>BUT, if you write back and give them a thumbs-up, I think I…</p>
<p>Don't hold your breath. My shop also claimed they had a "fix" for the stacking. It really didn't help. When I brought it back for its next service I told them it was still stacking, and they said to play around with that dial I mentioned in the other post. That dial really does affect things. You just have to figure out where the dial and your depth stroke combined with your writing stroke makes a perfect fit for you.</p>
<p>BUT, if you write back and give them a thumbs-up, I think I just might ship my A3 out to them. Might be cheaper than getting a new machine. Even though mine <em>is</em> decreasing, it still drives me batty, especially with realtime jobs. </p> I should proofread my posts.…tag:csrnation.ning.com,2012-11-29:1736041:Comment:12511762012-11-29T00:21:21.262ZTricia McLaughlinhttp://csrnation.ning.com/profile/Tricia58
<p>I should proofread my posts. It was meant to say "I called," not I call!</p>
<p>I should proofread my posts. It was meant to say "I called," not I call!</p>